APPLETON Fixture Hanger Bracket and Accessories

U-Line™ Factory Sealed 20 Amp Panel Mounting Receptacles feature a dead front design making them ideal for use with electrical equipment in hazardous locations. The ECHT is designed for use with 1-1/2#8221; NPT tapered threads, such as in panelboards. The ECH is designed to be used with 2#8221; NPSM straight threads. They are threaded for installation into approved enclosures with either threaded or non-threaded openings.

FSQC 30, 60 and 100 Amp Series Receptacles incorporate an interlocked disconnect switch for added safety in hazardous environments. The explosionproof and dust-ignitionproof FSQC is designed for use with Powertite™ plugs. Simply insert the plug and rotate the receptacle face to the ON position to lock it in place and energize the receptacle. For installations where different line voltages are used, a special polarization option prevents plug insertion into a receptacle wired for a different voltage.

U-Line™ ECS Factory Sealed 15 and 20 Amp Plugs and Receptacles feature a dead front design making them ideal for use with electrical equipment in hazardous locations. The neoprene gasket in the throat of the receptacle seals against the plug or the spring-loaded cover to seal out water, dust and corrosive compounds. Although U-Line plugs can be used with ordinary receptacles, U-Line receptacles are designed so that they can't be energized by an ordinary plug.

CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles feature delayed action construction. They provide explosionproof protection for stationary or portable equipment in hazardous, damp or corrosive locations. The CPS series is certified for use in Class I, Division 1 and 2 Groups B, C, D locations.