APPLETON Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles

CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles feature delayed action construction. They provide explosionproof protection for stationary or portable equipment in hazardous, damp or corrosive locations. The CPS series is certified for use in Class I, Division 1 and 2 Groups B, C, D locations.

GRF Conduit Outlet Boxes, Fixture Hanger Covers and Canopies are used for the suspension of lighting fixtures in Class I, Class II, and Class III classified locations. They are suitable for use in areas where moisture, dust and corrosive atmospheres are present.

EBR Interlocked Circuit Breaker Receptacle for Portable Electrical Equipment provides power for electrical equipment used in hazardous, damp, wet or corrosive locations. The interlock feature mechanically locks the plug in place when the circuit breaker is in the ON position, ensuring that contacts cannot be made or broken under load. The circuit breaker also provides short circuit and thermal time delay overload protection to safeguard valuable equipment against expensive damage.

U-Line™ ECS Factory Sealed 15 and 20 Amp Plugs and Receptacles feature a dead front design making them ideal for use with electrical equipment in hazardous locations. The neoprene gasket in the throat of the receptacle seals against the plug or the spring-loaded cover to seal out water, dust and corrosive compounds. Although U-Line plugs can be used with ordinary receptacles, U-Line receptacles are designed so that they can't be energized by an ordinary plug.