Showing all 8 results

APPLETON MRE Series 16 and 32 Amp Multiple Socket Outlets

MRE Series 16 and 32 Amp Multiple Socket Outlets are available as a stationary or portable panel. These outlets provide multiple sockets for powering portable or stationary equipment in corrosive and hazardous locations. The MRE features include a switch that allows total disconnection of power when the plug is removed, a flameproof chamber for containing the connection/disconnection of each phase, and short circuit protection.

APPLETON Round Tapered Steel Poles

Round Tapered Steel Poles are used to mount single or multiple luminaires to heights from 6.1 to 11.9 m (20 to 39 ft).

APPLETON Hinged Steel Poles

Hinged Steel Poles are used to mount single or multiple luminaires to heights from 6.1 to 9.1 m (20 to 35 ft). Hinged design allows easy servicing of luminaires at shoulder height.

APPLETON PCD2 Series Hazardous Location Photocontrol

PCD2 Series Hazardous Location Photocontrol provides automatic dusk-to-dawn lighting control in Class I, Division 2 locations. This encapsulated photocontrol is ideal for remote mounting in an FS box.

APPLETON PC Series Industrial Location Photocontrol

PC Series Industrial Location Photocontrol provides automatic dusk-to-dawn lighting control in non-hazardous locations It is a durable polycarbonate housing with a clear UV stabilized window ultrasonically welded in place. It is ideal for remote mounting in an FS box.

APPLETON EFKB Series Photocontrol

EFKB Series Photocontrol provides automatic dusk-to-dawn lighting control. The FD Series factory sealed single gang cast device boxes confines any arcing of the device within the enclosure, preventing ignition of ignitable atmospheres during operation. This encapsulated device is ideal for remote mounting.

APPLETON N2LED Series Emergency Luminaires

The N2LED Series emergency system provides illumination for safe egress through doors, aisle-ways, stairs, walkways, exit paths, and outer perimeter walls during interruption of normal power. The non-metallic emergency egress lighting systems is available with up to two direct mounted lamps on the main or remote units. The system supports up to 4 light heads in any main/remote combination utilizing up to 6 Watts of output power. This allows for a main unit without any light heads to drive up to 4 remote units or any other combination of 4 lights. They provide 100% lumen output for 90 minutes of operation with four light heads or 180 minutes of operation with two light heads.

HOFFMAN Hazardous Location Hole Seals

Hazardous Location Hole Seals are designed to be used on Increased Safety (Ex e) enclosures in ATEX or IECEx Zone 1 or 2 hazardous areas. Certified to be used on metallic, non-painted enclosures, these hole seals ensure a dust-, oil- and water-tight seal. Designed to seal extra pushbutton holes, conduit openings and knockout openings, these self-centering hole seals are easy to install.