Click to enlarge
Previous product
APPLETON AL Ball and Cushion Flexible Fixture Hangers
Back to products
Next product
APPLETON GHBPH Power Hook for Industrial High Bay Luminaires

APPLETON Fixture Hanger Bracket and Accessories

Fixture Hanger Brackets are used to mount fixtures directly to ceiling or wall separately from the conduit system. Safety Supports are available in a complete unit with two hooks and one rigid support for use on the dummy side of a lighting fixture. Locking Couplings prevent fixture stems from movement.

Compare
Add to wishlist
Category:
Appleton
Description

Features

  • Fixture hanger brackets are suitable for use with fixtures with 3/4-14 NPT conduit openings or hubs. Mounts directly to ceiling or wall separately from conduit system. It includes two brackets and two hexhead bolts. Bracket is iron with gray epoxy finish
  • Safety Supports are for use on the dummy side of lighting fixtures. Complete assembly includes two hooks and one rigid support. Each hook supplied with a screw for closing 3/8� jaw opening. Rigid Support straddles max. 1-1/4� conduit.
  • LC Steel Locking Couplings are provided with two setscrews (with Allen head) to fasten on outside of a hub and fixture stem. It is used to prevent a fixture stem from turning in hubs that are not normally supplied with setscrews. For use on 3/4″ fixture stem.

Specifications

NEC/CEC Certifications and Compliances
Rated for Ordinary (Unclassified) Locations
Brand

Brand

Appleton

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “APPLETON Fixture Hanger Bracket and Accessories”

Your email address will not be published. Required fields are marked *

Related products

Compare
Close

APPLETON GHBPH Power Hook for Industrial High Bay Luminaires

GHBPH Power Hook for Industrial High Bay Luminaires are hook and loop receptacle hangers used for the suspension of lighting fixtures.
Add to wishlist
Read more
Quick view
Compare
Close

APPLETON NEC EBR 30, 60, 100 and 150 Amp Series Interlocked Receptacles

EBR 30, 60, 100 and 150 Amp Series Receptacles incorporate your choice of an interlocked circuit breaker or disconnect switch along with explosionproof and dust-ignitionproof protection. The interlocked circuit breaker provides connect and disconnect operating functions as well as short circuit and thermal time delay overload protection, safeguarding valuable equipment against expensive damage. The interlocked disconnect switch provides safe connection and disconnection.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON U-Line™ ECCL/ECC Factory Sealed 20 Amp Cable Connectors

U-Line™ ECCL/ECC Factory Sealed 20 Amp Cable Connectors provide an easy way to extend the reach of your power supply to areas where a standard or U-Line™ receptacle may not be available. A gasket in the throat of the cable connector seals around the U-Line plug powering your equipment, protecting against moisture and combustible dusts. A twist with an audible click locks the plug in place and energizes the connector. When not in use, a spring cover seals the connector against the environmental elements.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles

Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles provide explosionproof protection for stationary or portable equipment in hazardous, damp or corrosive locations. It features delayed action construction; to operate, insert plug to first stop, move Slide-Lok™ slide to the right and push plug fully forward to energize. The Contender CPS meets all UL and CSA requirements for ground fault protection in hazardous locations when the GFCI cover is used.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON U-Line™ ECS Factory Sealed 15 and 20 Amp Plugs and Receptacles

U-Line™ ECS Factory Sealed 15 and 20 Amp Plugs and Receptacles feature a dead front design making them ideal for use with electrical equipment in hazardous locations. The neoprene gasket in the throat of the receptacle seals against the plug or the spring-loaded cover to seal out water, dust and corrosive compounds. Although U-Line plugs can be used with ordinary receptacles, U-Line receptacles are designed so that they can't be energized by an ordinary plug.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON EFKB Series Photocontrol

EFKB Series Photocontrol provides automatic dusk-to-dawn lighting control. The FD Series factory sealed single gang cast device boxes confines any arcing of the device within the enclosure, preventing ignition of ignitable atmospheres during operation. This encapsulated device is ideal for remote mounting.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON EF and FHS Series Flexible Hangers

EF and FHS Series Flexible Hangers are hook, loop and support hangers used for the suspension of lighting fixtures.
Add to wishlist
Read more
Quick view
Compare
Close

APPLETON PRE Series 16 Amp Plugs and Sockets

PRE Series 16 Amp Plugs and Sockets use a pin and sleeve design to deliver safe power to stationary and portable equipment such as lighting systems, conveyors, heating and air conditioning equipment, compressors, pumps or motor generators. Suitable for use in damp, wet or corrosive environments, PRE plugs and sockets are keyed and color coded per IEC directives. The sockets are available in wall-mount, flush-mount and mobile versions.

Add to wishlist
Read more
Quick view