APPLETON GHBPH Power Hook for Industrial High Bay Luminaires

BKX Rigid Fixture Hangers are designed for the suspension of lighting fixtures. They are available in three depths, all furnished with gasketed cover, four threaded conduit entries and 2 close-up plugs

U-Line™ Factory Sealed 20 Amp Plugs and Receptacles are used with stationary or portable electrically operated devices in hazardous locations. The ECP Interchanger plug is designed with built-in switch contacts which activate when the plug is twisted into the receptacle. This design allows the ECP plug to fit into standard NEMA 5-20R and 6-20R receptacles, but does not allow standard plugs to be used with the receptacle, ensuring that only safe connections can be made in a hazardous location.

WSR Interlocked Receptacles are designed to prevent electrical arcing when fixed or portable heavy duty equipment is used in adverse environments. Available in 30, 60 and 100 Amp designs, these metallic receptacles feature either a fused or non-fused disconnect and mechanical interlock that prevents plug removal under load. With a plug engaged and the switch in the ON position, the plug can't be removed. With the switch turned OFF and the plug removed, the receptacle can't be energized.

EBR Interlocked Circuit Breaker Receptacle for Portable Electrical Equipment provides power for electrical equipment used in hazardous, damp, wet or corrosive locations. The interlock feature mechanically locks the plug in place when the circuit breaker is in the ON position, ensuring that contacts cannot be made or broken under load. The circuit breaker also provides short circuit and thermal time delay overload protection to safeguard valuable equipment against expensive damage.