| Art. No.: | 262975 | Product Type: | TEF9980000 |
| Art. No.: | 262976 | Product Type: | TEF9980005 |
STAHL STATUS LIGHT SERIES TEF9980
The TEF9980 Status lights are designed to fulfil the latest requirements of CAA UK CAP 437, as well as operator’s needs for products that are cost-effective, reliable, require no maintenance and are applicable for use in all environments. The TEF 9980 Status light is available as a main light and as a repeater light. Both versions are fully monitored, which eliminates the light units’ redundancy need. In combination with Tranberg control system the lights can be set up for automatic test intervals, timeouts for both dim level diagnostics. A status light system should be installed if a condition can exist on an installation which may be hazardous for the helicopter or its occupants. The system should be a flashing red light (or lights), visible to the pilot from any direction of approach and on any landing heading. The aeronautical meaning of a flashing red light is either “do not land, aerodrome not available for landing” or “move clear of landing area”. The system should be automatically initiated at the appropriate hazard level (e.g. impending gas release)
- Status light as described in CAA UK CAP437, NORMAM-27/DPC and 2009 MODU Code
- Height of light units <25 cm. Allows for on-deck installation
- Automatic monitoring of all light units when in combination with Tranberg control system. No need for redundancy units
- Maintenance free
- Night vision goggle (NVG) compatible
- Low power consumption: Main light, 30 W and Repeater light 2.6 W
Description
Brand
Brand
Stahl
Related products
STAHL FLOODLIGHT LED SERIES 6125/2
The new generation of LED floodlights for Zone 1 also relies on the tried-and-tested, robust stainless steel enclosure (optionally seawater-resistant stainless steel 316L). However, thanks to their smaller design and a new generation of drivers, they weigh significantly less, thereby improving ergonomics during installation and operation. Now with three power classes and the three tried-and-tested light distribution curves, the LED floodlight generates three colours of LED light – warm white, neutral white and cold white.
- LED high-performance floodlight with a power consumption up to 225 W
- Wide voltage input between 110 V and 277 V (50 Hz and 60 Hz)
- Suitable for operation using central battery systems and mains DC (176 V to 264 V DC)
- Three power classes available: 100 W, 160 W and 225 W
- An enclosure made of 316L stainless steel is available for marine and offshore applications
STAHL LINEAR LUMINAIRE FOR FLUORESCENT LAMPS EXLUX SERIES 6401
The 6401 EXLUX luminaire is suited to normal indoor and outdoor lighting applications. In no time at all and with very little effort, using the accessories it can be fitted to the wall, ceiling or a pole, or alternatively, it can be suspended. The practical central lock is available with an optional switching element that disconnects the power supply at all poles when the plastic enclosure is opened. Lightweight yet strong: The high-quality workmanship makes this luminaire robust and minimises maintenance requirements.
- Can be used in Zone 2, 21 and 22
- Explosion-protected linear luminaire with two fluorescent lamps: 18 W, 36 W and 58 W
- Extremely robust: Impact strength rating of IK10
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS SERIES 6418/1
The safety light made of 6418/1 series sheet steel is used for emergency lighting and suitable for use in spraying and painting systems. The battery powers the emergency lighting for over 1.5 hours. In case of a defective lamp, it is disconnected. In operation, their robust construction means that they require minimal maintenance. With the right accessories, these high-quality luminaires are easy to install in a wide variety of ways in no time at all
- For use in Zones 2, 21 and 22
- Enclosure made from powdercoated sheet steel or stainless steel
- Central lock for opening and closing the luminaire plus a safety switch that disconnects the power supply at all poles when the luminaire is opened
- With weekly functional test and emergency lighting light duration test every six months
STAHL EMERGENCY LUMINAIRE WITH LED EXLUX SERIES 6009/4
The emergency luminaire with Series 6009/4 LED with integrated battery can be installed in stand-by switching, continuous mode or in switchable stand-by switching. A weekly functional test and annual rated operating time test are performed automatically. The results are indicated by an LED.
- The latest LED technology with a high luminous efficacy and a long service life
- Extremely high luminaire efficacy
- Can be adjusted from a 1.5 to a 3.0 h rated operating time
- Luminous flux after 100,000 h still 90% of the starting luminous flux
- Optionally with DALI for controlling and monitoring the luminaire
- Weekly functional test and annual rated operating time test
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS SERIES 6018/1
The safety light made of 6018/1 series sheet steel is used for emergency lighting and suitable for use in spraying and painting systems. The battery powers the emergency lighting over 1.5 or 3 hours. In case of a defective lamp, the luminaire switches to the working lamp. In operation, their robust construction means that they require minimal maintenance. With the right accessories, these high-quality luminaires are easy to install in a wide variety of ways in no time at all.
- For use in Zones 1, 2, 21 and 22
- Enclosure made from powdercoated sheet steel or stainless steel
- Central lock for opening and closing the luminaire plus a safety switch that disconnects the power supply at all poles when the luminaire is opened
- With weekly functional test and annual emergency lighting light duration test
STAHL LINEAR LUMINAIRE WITH LED EXLUX SERIES 6002/4
- The latest LED technology with a high luminous efficacy and a long service life
- Extremely high luminaire efficacy
- Luminous flux after 100,000 h still 90% of the starting luminous flux
- Optionally with DALI for controlling and monitoring the luminaire
- Optionally addressable for direct actuation of a common battery system
STAHL EMERGENCY LUMINAIRE WITH LED EXLUX SERIES 6409/4
The emergency luminaire with Series 6409/4 LED with integrated battery can be installed in stand-by switching, continuous mode or in switchable stand-by switching. A weekly functional test and annual rated operating time test are performed automatically. The results are indicated by an LED.
- State-of-the-art LED technology with high luminous efficacy and long service life
- Extremely high luminaire efficacy
- Choice between a 1.5 h or 3.0 h rated operating time
- Luminous flux after 100,000 h still 90% of the starting luminous flux
- Optionally with DALI for controlling and monitoring the luminaire
- Weekly function test and annual rated operating time test
Reviews
There are no reviews yet.