STAHL INTEGRATED HELIDECK LIGHT CONTROL TEF4600
The TEF 4600 integrated Helideck Lights Control is a first integrated control system for an easy and safe control and monitoring of all lights installed in a helideck. The control system can be delivered for use in both safe areas and Zone 1 areas. All types of Tranberg lights can be connected (perimeter lights, floodlights, obstruction lights, illuminated windsocks, Circle & H lights, status lights, etc.). Central to the system is a touch panel. Using an intuitive user-friendly menu, the user can simply set the lights on or off or dim respective lights when needed. The touch panel can be mounted either in the door of the main panel (safe areas only), in the adjacent room or elsewhere. R. STAHL’s Exicom MT-498 operator panel can be used for Zones 1 and 2. All touch panels come fully loaded with software and configuration options. Regardless of the control panel type, additional remote control panels may be connected. These are push-button panels with integrated illumination, allowing local control of lights, and in full synchronization with the computer screens. Applications: Deck light control panel; floodlight control panel; helideck control panel; heating system control panel; pump control panel; status panel; general control panel
- All control gear in one cabinet, simplifying connections, control and monitoring
- Smaller footprint than individual control cabinets for each type of light
- Combined with Tranberg’s new line of LED helideck lights means an installation with an absolute minimum of required inspections and minimized maintenance
- Connection with a supervisory control system through Ethernet, Profibus or similar standards
- Optional touchscreen, allowing local control (Zone 1 panel or non-Ex)
- Optional remote button and lamp control panel, allowing additional control of lights
Related products
STAHL C-LUX 6109 SERIES COMPACT EMERGENCY LUMINAIRES
C-LUX 6109 series compact emergency luminaires can be used for emergency lighting, as well as for indication or escape route luminaires.
- Suitable for wall, ceiling and suspended mounting
- Operating modes: Continuous mode, continuous mode with switchable emergency lighting
- With function and rated operating time test with optional DALI technology
- Large recognition range d ≥ 30 m
- Emergency exit signs with suspended panel so that they can be read from both sides
- Lightweight, robust and compact design
STAHL FLOODLIGHT SERIES 6121/1
The 6121 series floodlight for conventional lamp technologies is ideal for lighting up large areas from elevated positions. Two different light distribution types offer added versatility to fulfil your lighting needs. For normal application areas, the floodlight is designed with a single powder coating and a bracket made from single-coated sheet steel. Each variant is optionally available with a double powder coating and double-coated bracket made from 316Lstainless steel specifically for offshore use.
- For use in gas group IIC
- Usable in the temperature range from -40 ... +60 °C
- Material: Enclosure made of cast aluminium, mounting components in stainless steel
- Lamp options: halogen lamps (QT) up to 500 W, halogen metal halide lamps (HIT) up to 400 W, sodium vapour high pressure lamps (HST) up to 400 W
STAHL TUBULAR LIGHT FITTING WITH LED SERIES 6036
The 6036 series compact LED tubular light fitting is ideal for general lighting applications and for use as machine lighting, even in relatively inaccessible places with very little space. This light boasts a long service life of up to 100,000 hours thanks to its use of energy-efficient LED technology, coupled with electronics that have been developed in-house by R. STAHL. Due to its robust construction, it can withstand extreme temperatures of between -55 °C and +60 °C.
- Degree of protection IP66 and IP68
- Type of protection Ex d
- Vibration-resistant, lightweight, robust (impact strength rating of IK10) and maintenance-free
- Many light fittings can be connected to single miniature circuit breaker due to incredibly low start-up current
STAHL EMERGENCY LUMINAIRE WITH LED EXLUX SERIES 6409/4
The emergency luminaire with Series 6409/4 LED with integrated battery can be installed in stand-by switching, continuous mode or in switchable stand-by switching. A weekly functional test and annual rated operating time test are performed automatically. The results are indicated by an LED.
- State-of-the-art LED technology with high luminous efficacy and long service life
- Extremely high luminaire efficacy
- Choice between a 1.5 h or 3.0 h rated operating time
- Luminous flux after 100,000 h still 90% of the starting luminous flux
- Optionally with DALI for controlling and monitoring the luminaire
- Weekly function test and annual rated operating time test
STAHL LINEAR LUMINAIRE FOR FLUORESCENT LAMPS EXLUX SERIES 6001
The 6001 EXLUX luminaire is suited to normal lighting applications in almost any facility. In no time at all and with very little effort, using the accessories it can be fitted to the wall, ceiling or a pole, or alternatively, it can be suspended. The practical central lock has a safety switch that disconnects the power supply at all poles when the plastic enclosure is opened. Lightweight yet strong: The high-quality workmanship makes this luminaire robust and minimises maintenance requirements.
- Can be used in Zone 1, 2, 21 and 22
- Extremely robust: Impact strength rating of IK10
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS SERIES 6418/1
The safety light made of 6418/1 series sheet steel is used for emergency lighting and suitable for use in spraying and painting systems. The battery powers the emergency lighting for over 1.5 hours. In case of a defective lamp, it is disconnected. In operation, their robust construction means that they require minimal maintenance. With the right accessories, these high-quality luminaires are easy to install in a wide variety of ways in no time at all
- For use in Zones 2, 21 and 22
- Enclosure made from powdercoated sheet steel or stainless steel
- Central lock for opening and closing the luminaire plus a safety switch that disconnects the power supply at all poles when the luminaire is opened
- With weekly functional test and emergency lighting light duration test every six months
HOFFMAN Hazardous Location LED Lights, Strip
Hazardous Location LED Strip Lights provide enclosure illumination in hazardous environments. These lights are ideal for remote and darkened enclosure applications in Class 1, Division 2 hazardous areas. With a robust design, these lights have a life span of 100,000 hours and superior lighting performance with easy field angle adjustment brackets. These versatile, light-weight LED lights provide mounting flexibility and are easy to install in an enclosure.
Reviews
There are no reviews yet.