Click to enlarge
Previous product
APPLETON DBR 30, 60, 100 and 150 Amp Series Receptacles
APPLETON DBR 30, 60, 100 and 150 Amp Series Receptacles
Back to products
Next product
APPLETON UPR Series 16 Amp Plugs and Sockets
APPLETON UPR Series 16 Amp Plugs and Sockets

APPLETON PRE Series 32 Amp Plugs and Sockets

PRE Series 32 Amp Plugs and Sockets use a pin and sleeve design to deliver safe power to stationary and portable equipment such as lighting systems, conveyors, heating and air conditioning equipment, compressors, pumps or motor generators. Suitable for use in damp, wet or corrosive environments, PRE plugs and sockets are keyed and color coded per IEC directives. The sockets are available in wall-mount, flush-mount and mobile versions.

Compare
Add to wishlist
Category:
Appleton
Description

Features

  • Plug and socket system is designed with a safe disconnect mechanism to insure maximum hazardous location protection
  • The contact separation is in a flameproof chamber
  • The automatic electrical disconnection of each phase is contained in a second flameproof chamber
  • Short circuit protection is 20 kA, while normal reference is 10 kA
  • Different voltages are color coded for easy identification
  • The receptacles are keyed to accept only ATX plugs (other plugs cannot be inserted)
  • ATX plugs can be used in non-hazardous IEC 309 sockets
  • Operating temperature of -40 °C to +55 °C (-40 °F to +131 °F)

Specifications

Area Classification
Zone 1 and 2 – 21 and 22; Ex II 2 GD; IP66; IK10
Operating Temperature
-40 °C to +55 °C (-40 °F to +131 °F)
Voltage
100/130 Vac, 200/250 Vac, 380/415 Vac or 480/500 Vac
Number of Poles
2, 3
Number of Wires
3, 4, 5
Hertz
50/60 Hz
Materials and Finishes
Wall Socket is high impact resistance fiberglass reinforced polyester. Polyamide plug, mobile socket and flush socket.
Brand

Brand

Appleton

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “APPLETON PRE Series 32 Amp Plugs and Sockets”

Your email address will not be published. Required fields are marked *

Related products

Compare
Close

APPLETON U-Line™ ECS Factory Sealed 15 and 20 Amp Plugs and Receptacles

U-Line™ ECS Factory Sealed 15 and 20 Amp Plugs and Receptacles feature a dead front design making them ideal for use with electrical equipment in hazardous locations. The neoprene gasket in the throat of the receptacle seals against the plug or the spring-loaded cover to seal out water, dust and corrosive compounds. Although U-Line plugs can be used with ordinary receptacles, U-Line receptacles are designed so that they can't be energized by an ordinary plug.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON GRF Conduit Outlet Boxes, Fixture Hanger Covers and Canopies

GRF Conduit Outlet Boxes, Fixture Hanger Covers and Canopies are used for the suspension of lighting fixtures in Class I, Class II, and Class III classified locations. They are suitable for use in areas where moisture, dust and corrosive atmospheres are present.

Add to wishlist
Read more
Quick view
Compare
Close

HOFFMAN Hazardous Location Heaters

Designed for hazardous locations where electronic components require protection from cold freezing temperatures, condensation and corrosion.
Add to wishlist
Read more
Quick view
Compare
Close

APPLETON Fixture Hanger Bracket and Accessories

Fixture Hanger Brackets are used to mount fixtures directly to ceiling or wall separately from the conduit system. Safety Supports are available in a complete unit with two hooks and one rigid support for use on the dummy side of a lighting fixture. Locking Couplings prevent fixture stems from movement.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON JBR 30 and 60 Amp Series Interlocked Receptacles

JBR Series 30 and 60 Amp Switched Receptacles are heavy duty flanged and bolted enclosures that provide exceptional safety in hazardous locations. The terminal block in the mounting box makes wiring easy, and a special polarization option prevents insertion of a plug into a receptacle wired for a different voltage. Dead front interlocked construction requires the plug to be fully inserted before the switch can be placed in the ON position.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON Factory Sealed 20 Amp Plugs and Receptacles

U-Line™ Factory Sealed 20 Amp Plugs and Receptacles are used with stationary or portable electrically operated devices in hazardous locations. The ECP Interchanger plug is designed with built-in switch contacts which activate when the plug is twisted into the receptacle. This design allows the ECP plug to fit into standard NEMA 5-20R and 6-20R receptacles, but does not allow standard plugs to be used with the receptacle, ensuring that only safe connections can be made in a hazardous location.

Add to wishlist
Read more
Quick view
Compare
Close

HOFFMAN Hazardous Location Window Kits

Hazardous Location Window Kits are designed to be used on Increased Safety (Ex e) enclosures in ATEX or IECEx Zone 1 or 2 hazardous areas. These window kits ensure a dust-, oil-, and water-tight seal. Designed for use as viewing windows, these window kits are ideal for visibility of internal enclosure components. The windows are easily installed by making a cutout in the enclosure and attaching the window and frame with included mounting hardware.
Add to wishlist
Read more
Quick view
Compare
Close

APPLETON UPRD Series 16 Amp and PRD Series 32, 80 and 125 Amp Plugs and Sockets

UPRD Series 16 Amp and PRD Series 32, 80 and 125 Amp Plugs and Sockets are designed for hazardous areas where weatherproof and robust equipment is required. These flameproof plugs and sockets are certified for hazardous areas Zones 1, 2, 21 and 22. The UPRD provides safe, reliable power for portable or stationary electrical equipment such as lighting and heating systems, conveyors, motor starters, air-conditioning appliances, compressors and pumps.

Add to wishlist
Read more
Quick view