APPLETON CES and CESD Factory Sealed 30 and 60 Amp Pin and Sleeve Receptacles

CES and CESD Factory Sealed 30 and 60 Amp Pin and Sleeve Receptacles offer explosionproof protection for stationary or portable equipment used in hazardous locations. The Slide-Lok™ feature enforces a three-stage power insertion process to prevent unintended power up or accidental disconnect. Factory sealed and constructed of triple coated malleable iron with copperfree aluminum cover, these receptacles are designed for rugged and reliable performance.

Features

Factory sealed. No external seals required. Arcing is safely confined to receptacle interior
Energized receptacle contacts deeply recessed to reduce danger of accidental touching
Style 2 (shell and extra pole) grounding
Spring door keeps dust out of receptacle when plug is not in use
Unique design brass contacts exert constant pressure along entire contact surface and provide superior electrical contact
Contacts have beryllium copper wire springs
Plug mechanical cable clamps prevent strain on cables; they meet or exceed UL strain relief pull-out requirements
Neoprene bushing compressed by cable collar prevents entrance of water
Insulators provide superior dielectric and mechanical strength and lowest arc tracking
Smooth, rounded integral bushing in each hub protects conductor insulation
Delayed action construction. To operate, insert plug to first stop, move Slide-Lok™ slide to right and push plug fully forward
CPH plug fits Powertite™ Series hazardous location receptacles

Specifications

Hazardous Area Classification: 30 and 60 Amp CES: Class I, Division 1 and 2, Groups C, D; 30 Amp CESD: Class I, Division 1 and 2, Groups C, D; 60 Amp CESD: Class I, Division 1 and 2, Group D

Amperage: 30 or 60

Voltage: 125-250 Vac or 480 Vac

Number of Poles: 3 or 4

Number of Wires: 2 or 3

Horsepower Ratings: 1-1/2, 3 or 5

Plug Cable Diameter: 30 Amp: 0.500 to 1.125#8221;, 60 Amp: 0.500 to 1.375#8221;

Mounting Box Entries: Dead-End

Materials and Finishes: Receptacles, covers and caps are copperfree (4/10 of 1% max.) aluminum with ceramic burnished. Mounting box is malleable iron with triple-coat (1) zinc electroplate, (2) chromate and (3) epoxy powder coat finish. Insulating blocks are fiber glass reinfor