Click to enlarge
Previous product
APPLETON UPR Series 32 Amp Plugs and Sockets
APPLETON UPR Series 32 Amp Plugs and Sockets
Back to products
Next product
APPLETON UPR Series 63 Amp Plugs and Sockets
APPLETON UPR Series 63 Amp Plugs and Sockets

APPLETON PRE Series 63 Amp Plugs and Sockets

PRE Series 63 Amp Plugs and Sockets use a pin and sleeve design to deliver safe power to stationary and portable equipment such as lighting systems, conveyors, heating and air conditioning equipment, compressors, pumps or motor generators. Suitable for use in damp, wet or corrosive environments, PRE plugs and sockets are keyed and color coded per IEC directives. The sockets are available in wall-mount, flush-mount and mobile versions.

Compare
Add to wishlist
Category:
Appleton
Description

Features

  • Positive polarization: only ATX plugs of same style, number of poles and ampere rating may be used with these sockets
  • Interlocked 3-pole or 4-pole Ex de disconnecting on-load switch, with auxiliary early break contact (capacity 2.5 mm²/0.004 in² max)
  • Plug is mechanically locked in socket when switch is ON
  • Switch operating handle can be padlocked in OFF position (max 4 padlocks )
  • Plug cannot be inserted or removed unless switch is in OFF position
  • Operating temperature of -30 °C to +55 °C (-22 °F to +131 °F)

Specifications

Area Classification
Zone 1 and 2 – 21 and 22; Ex II 2 GD; IP66; IK10
Operating Temperature
-30 °C to +55 °C (-22 °F to +131 °F)
Voltage
380/415 Vac, 480/500 Vac, 440/460 Vac or 600/690 Vac
Number of Poles
3
Number of Wires
4, 5
Hertz
50/60 or 60 Hz
Materials and Finishes
Wall Socket is high impact resistance fiberglass reinforced polyester. Polyamide plug and flap cover.
Brand

Brand

Appleton

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “APPLETON PRE Series 63 Amp Plugs and Sockets”

Your email address will not be published. Required fields are marked *

Related products

Compare
Close

APPLETON Factory Sealed 20 Amp Plugs and Receptacles

U-Line™ Factory Sealed 20 Amp Plugs and Receptacles are used with stationary or portable electrically operated devices in hazardous locations. The ECP Interchanger plug is designed with built-in switch contacts which activate when the plug is twisted into the receptacle. This design allows the ECP plug to fit into standard NEMA 5-20R and 6-20R receptacles, but does not allow standard plugs to be used with the receptacle, ensuring that only safe connections can be made in a hazardous location.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON GRF Conduit Outlet Boxes, Fixture Hanger Covers and Canopies

GRF Conduit Outlet Boxes, Fixture Hanger Covers and Canopies are used for the suspension of lighting fixtures in Class I, Class II, and Class III classified locations. They are suitable for use in areas where moisture, dust and corrosive atmospheres are present.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON Fixture Hanger Bracket and Accessories

Fixture Hanger Brackets are used to mount fixtures directly to ceiling or wall separately from the conduit system. Safety Supports are available in a complete unit with two hooks and one rigid support for use on the dummy side of a lighting fixture. Locking Couplings prevent fixture stems from movement.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON EF and FHS Series Flexible Hangers

EF and FHS Series Flexible Hangers are hook, loop and support hangers used for the suspension of lighting fixtures.
Add to wishlist
Read more
Quick view
Compare
Close

HOFFMAN Aluminum Continuous Hinge with Clamps, Type 12

The Continuous Hinge Aluminum Enclosure with Clamps is a lightweight enclosure solution that features a hinged cover that secures on the side opposite the hinge via stainless steel clamps and screws. This enclosure is ideal for protecting components and controls in indoor applications, and maintains a Type-12 rating.
Add to wishlist
Read more
Quick view
Compare
Close

APPLETON U-Line™ ECCL/ECC Factory Sealed 20 Amp Cable Connectors

U-Line™ ECCL/ECC Factory Sealed 20 Amp Cable Connectors provide an easy way to extend the reach of your power supply to areas where a standard or U-Line™ receptacle may not be available. A gasket in the throat of the cable connector seals around the U-Line plug powering your equipment, protecting against moisture and combustible dusts. A twist with an audible click locks the plug in place and energizes the connector. When not in use, a spring cover seals the connector against the environmental elements.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles

Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles provide explosionproof protection for stationary or portable equipment in hazardous, damp or corrosive locations. It features delayed action construction; to operate, insert plug to first stop, move Slide-Lok™ slide to the right and push plug fully forward to energize. The Contender CPS meets all UL and CSA requirements for ground fault protection in hazardous locations when the GFCI cover is used.

Add to wishlist
Read more
Quick view
Compare
Close

APPLETON U-Line™ ECS Factory Sealed 15 and 20 Amp Plugs and Receptacles

U-Line™ ECS Factory Sealed 15 and 20 Amp Plugs and Receptacles feature a dead front design making them ideal for use with electrical equipment in hazardous locations. The neoprene gasket in the throat of the receptacle seals against the plug or the spring-loaded cover to seal out water, dust and corrosive compounds. Although U-Line plugs can be used with ordinary receptacles, U-Line receptacles are designed so that they can't be energized by an ordinary plug.

Add to wishlist
Read more
Quick view