| Art. No.: | 262996 | Product Type: | TEF9970200 |
| Art. No.: | 262997 | Product Type: | TEF9970300 |
STAHL HELIDECK FLOODLIGHT LED SERIES TEF9970
Luminaires designed and manufactured by Tranberg are intended for use in rough environments, and to meet applicable international standards. The new LED floodlight TEF 9970 by Tranberg sets a new standard in the industry as it has a wider operating temperature range, along with several new features. The LED light source provides a hugely longer lifetime expectancy than xenon light bulbs, while the special designed optics ensure an ideal coverage of the helideck surface without giving glare to pilots in the critical landing process. As an option, a dimming functionality may be installed, which reduces light output to 50% when and if required. The operating voltage span is wide, and absorbs voltage variances and spikes without resulting in flickering or changes in light output. The innovative design is also great news for service and maintenance personnel, as it is a sealed unit which requires noinspection of traditional flame paths. Helideck equipment manufactured by Tranberg is delivered to offshore installations, oil tankers and supply ships, hotels and hospitals landing areas all over the world.
- Floodlight for helideck landing areas
- For use in hazardous areas
- Floodlighting
- Rugged and low profile floodlight made from marine proofed aluminium
- Sealed for life
- Simple to install and maintain
- Light module is maintenance free
- Proven degree of protection
- Resistant to vibrations
- Complies with: ICAO Annex 14 Vol. II; NORSOK C-004 201
Description
Brand
Brand
Stahl
Related products
HOFFMAN Straight Section, Feed-Through SS Hinged-Cover, Type 4X
Feed-Through Stainless Steel Hinged-Cover, Type 4X Straight Sections are used for enclosing wire and cable in wireway runs. Its water-proof and stainless steel features makes it suitable for frequently hosed down, very wet or highly corrosive applications. The traditional closed-loop design has an opening on one side for easy access to wires and cables. Sections are available in lengths from 12 inch to 120 inch.
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS SERIES 6018/1
The safety light made of 6018/1 series sheet steel is used for emergency lighting and suitable for use in spraying and painting systems. The battery powers the emergency lighting over 1.5 or 3 hours. In case of a defective lamp, the luminaire switches to the working lamp. In operation, their robust construction means that they require minimal maintenance. With the right accessories, these high-quality luminaires are easy to install in a wide variety of ways in no time at all.
- For use in Zones 1, 2, 21 and 22
- Enclosure made from powdercoated sheet steel or stainless steel
- Central lock for opening and closing the luminaire plus a safety switch that disconnects the power supply at all poles when the luminaire is opened
- With weekly functional test and annual emergency lighting light duration test
STAHL TUBULAR LIGHT FITTING WITH LED SERIES 6036
The 6036 series compact LED tubular light fitting is ideal for general lighting applications and for use as machine lighting, even in relatively inaccessible places with very little space. This light boasts a long service life of up to 100,000 hours thanks to its use of energy-efficient LED technology, coupled with electronics that have been developed in-house by R. STAHL. Due to its robust construction, it can withstand extreme temperatures of between -55 °C and +60 °C.
- Degree of protection IP66 and IP68
- Type of protection Ex d
- Vibration-resistant, lightweight, robust (impact strength rating of IK10) and maintenance-free
- Many light fittings can be connected to single miniature circuit breaker due to incredibly low start-up current
STAHL FLOODLIGHT LED SERIES 6125/2
The new generation of LED floodlights for Zone 1 also relies on the tried-and-tested, robust stainless steel enclosure (optionally seawater-resistant stainless steel 316L). However, thanks to their smaller design and a new generation of drivers, they weigh significantly less, thereby improving ergonomics during installation and operation. Now with three power classes and the three tried-and-tested light distribution curves, the LED floodlight generates three colours of LED light – warm white, neutral white and cold white.
- LED high-performance floodlight with a power consumption up to 225 W
- Wide voltage input between 110 V and 277 V (50 Hz and 60 Hz)
- Suitable for operation using central battery systems and mains DC (176 V to 264 V DC)
- Three power classes available: 100 W, 160 W and 225 W
- An enclosure made of 316L stainless steel is available for marine and offshore applications
STAHL FLOODLIGHT LED SERIES 6525/22 (EX EC)
The revised generation of LED floodlights for Zone 2 now includes a version with Ex ec type of protection especially for the European market. This eliminates the time-consuming vapour tightness test. The wide-range input now also meets the electrical installation conditions for global use. With an optional DALI interface, the floodlight paves the way to a digital lighting solution. Its extremely low start-up current can also support existing installations, as the circuit breakers that are already installed do not need to be replaced.
- Checked and approved in accordance with Ex ec type of protection, so vapour tightness test is not applicable
- Stainless steel enclosure as standard for a long service life and safety even under harsh ambient conditions
- Extremely wide range of ambient temperatures – between -60 °C and +60 °C
- Robust design with IK10 and IP66
- Wide-range input with optional 100 V to 277 V
- DALI versions available for lighting control, monitoring and switching
Reviews
There are no reviews yet.