| Art. No.: | 166027 | Product Type: | TEF9964030 |
| Art. No.: | 166026 | Product Type: | TEF9964024 |
| Art. No.: | 166024 | Product Type: | TEF9964000 |
| Art. No.: | 166025 | Product Type: | TEF9964010 |
STAHL XENON HELIDECK FLOODLIGHT SERIES TEF9964
The vibration-resistant 9964 series TEF xenon floodlights provide safe, explosion-protected illumination for helicopter landing pads. The long-life xenon lamp is housed in a robust enclosure made from acid-resistant stainless steel, which is designed to provide glare-free illumination.
- Degree of protection IP66/IP67, for use in hazardous areas
- easy to install, easy to maintain
- enclosure made from acid-resistant stainless steel (SS316L), protective glass/safety glass
Description
Brand
Brand
Stahl
Related products
STAHL EMERGENCY LUMINAIRE WITH LED EXLUX SERIES 6409/4
The emergency luminaire with Series 6409/4 LED with integrated battery can be installed in stand-by switching, continuous mode or in switchable stand-by switching. A weekly functional test and annual rated operating time test are performed automatically. The results are indicated by an LED.
- State-of-the-art LED technology with high luminous efficacy and long service life
- Extremely high luminaire efficacy
- Choice between a 1.5 h or 3.0 h rated operating time
- Luminous flux after 100,000 h still 90% of the starting luminous flux
- Optionally with DALI for controlling and monitoring the luminaire
- Weekly function test and annual rated operating time test
STAHL LINEAR LUMINAIRE WITH LED EXLUX SERIES 6402/4
- State-of-the-art LED technology with high luminous efficacy and long service life
- Extremely high luminaire efficacy
- Luminous flux after 100,000 h still 90% of the starting luminous flux
- Optionally with DALI for controlling and monitoring the luminaire
- Optionally with address modules for directly actuation of a common battery system
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS SERIES 6018/1
The safety light made of 6018/1 series sheet steel is used for emergency lighting and suitable for use in spraying and painting systems. The battery powers the emergency lighting over 1.5 or 3 hours. In case of a defective lamp, the luminaire switches to the working lamp. In operation, their robust construction means that they require minimal maintenance. With the right accessories, these high-quality luminaires are easy to install in a wide variety of ways in no time at all.
- For use in Zones 1, 2, 21 and 22
- Enclosure made from powdercoated sheet steel or stainless steel
- Central lock for opening and closing the luminaire plus a safety switch that disconnects the power supply at all poles when the luminaire is opened
- With weekly functional test and annual emergency lighting light duration test
STAHL FLOODLIGHT LED SERIES 6525/21 (EX NR)
The wide-range input now also meets the electrical installation conditions for global use. With an optional DALI interface, the floodlight paves the way to a digital lighting solution. Its extremely low start-up current can also support existing installations, as the circuit breakers that are already installed do not need to be replaced.
- Stainless steel enclosure as standard for a long service life and safety even under harsh ambient conditions
- Extremely wide range of ambient temperatures – between -60 °C and +60 °C
- Robust design with IK10 and IP66
- Wide-range input with optional 100 V to 277 V
- DALI versions available for lighting control, monitoring and switching
STAHL FLOODLIGHT LED SERIES 6125/2
The new generation of LED floodlights for Zone 1 also relies on the tried-and-tested, robust stainless steel enclosure (optionally seawater-resistant stainless steel 316L). However, thanks to their smaller design and a new generation of drivers, they weigh significantly less, thereby improving ergonomics during installation and operation. Now with three power classes and the three tried-and-tested light distribution curves, the LED floodlight generates three colours of LED light – warm white, neutral white and cold white.
- LED high-performance floodlight with a power consumption up to 225 W
- Wide voltage input between 110 V and 277 V (50 Hz and 60 Hz)
- Suitable for operation using central battery systems and mains DC (176 V to 264 V DC)
- Three power classes available: 100 W, 160 W and 225 W
- An enclosure made of 316L stainless steel is available for marine and offshore applications
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS EXLUX SERIES 6409/5
The 6409 Series EXLUX emergency luminaire is suitable for use as safety lighting. It is lightweight and requires minimal maintenance. The external battery powers the emergency lighting for 1.5 or 3 hours. If one lamp is faulty, the luminaire switches to the working lamp. When the luminaire or battery case is opened, the battery circuit is disconnected. The robust plastic enclosure of the luminaire is easy to open thanks to the practical central lock.
- Can be used in Zones 2, 21 and 22
- Weekly function test and annual emergency light duration test
HOFFMAN Straight Section, Feed-Through SS Hinged-Cover, Type 4X
Feed-Through Stainless Steel Hinged-Cover, Type 4X Straight Sections are used for enclosing wire and cable in wireway runs. Its water-proof and stainless steel features makes it suitable for frequently hosed down, very wet or highly corrosive applications. The traditional closed-loop design has an opening on one side for easy access to wires and cables. Sections are available in lengths from 12 inch to 120 inch.
Reviews
There are no reviews yet.