| Art. No.: | 264846 | Product Type: | L149/2-3311-5010 |
| Art. No.: | 246909 | Product Type: | L149/2-5311-5010 |
| Art. No.: | 252281 | Product Type: | L149/2-5311-2010 |
STAHL INSPECTION LIGHT LED SERIES L149
The L149 inspection light is a versatile light that allows you to see into every corner. This is all down to its state-of-the-art LED technology, coupled with its long-life electronics, which have been developed in-house by R. STAHL and exhibit high energy efficiency and superior illuminance. The innovative design of the enclosure makes the light extremely slim and lightweight. Its lockable suspension hooks and practical anti-roll protection make it ideal for use in the workshop.
- Long-life, energy-saving, midpower LEDs embody design innovation
- For 110 to 240 V AC/DC or 24 to 48 V AC/DC
- Standard version with diffuser for reduced glare and H07-RNF connection line, 2 x 1.5 mm²
- Further connection lines and connectors available as options
Description
Brand
Brand
Stahl
Related products
STAHL FLOODLIGHT LED SERIES 6125/2
The new generation of LED floodlights for Zone 1 also relies on the tried-and-tested, robust stainless steel enclosure (optionally seawater-resistant stainless steel 316L). However, thanks to their smaller design and a new generation of drivers, they weigh significantly less, thereby improving ergonomics during installation and operation. Now with three power classes and the three tried-and-tested light distribution curves, the LED floodlight generates three colours of LED light – warm white, neutral white and cold white.
- LED high-performance floodlight with a power consumption up to 225 W
- Wide voltage input between 110 V and 277 V (50 Hz and 60 Hz)
- Suitable for operation using central battery systems and mains DC (176 V to 264 V DC)
- Three power classes available: 100 W, 160 W and 225 W
- An enclosure made of 316L stainless steel is available for marine and offshore applications
HOFFMAN Straight Section, Feed-Through SS Hinged-Cover, Type 4X
Feed-Through Stainless Steel Hinged-Cover, Type 4X Straight Sections are used for enclosing wire and cable in wireway runs. Its water-proof and stainless steel features makes it suitable for frequently hosed down, very wet or highly corrosive applications. The traditional closed-loop design has an opening on one side for easy access to wires and cables. Sections are available in lengths from 12 inch to 120 inch.
STAHL LINEAR LUMINAIRE FOR FLUORESCENT LAMPS ECOLUX METAL SERIES L610/1 (DISCONTINUED)
The L610/1 series ECOLUX METALL linear luminaire is designed for industrial use and is suited to general lighting applications in harsh environments with tough demands. In no time at all and with very little effort, it can be fitted to the wall or ceiling. And thanks to the quick-release locks, the translucent cover is easy to open. The high-quality workmanship makes it robust and minimises maintenance requirements.
- Highly resistant industrial design
- Two fluorescent lamps: 18 W and 36 W
- Enclosure made from sheet steel or SS304/SS316L stainless steel (suitable for use in marine environments)
STAHL EMERGENCY LUMINAIRE WITH LED EXLUX SERIES 6409/4
The emergency luminaire with Series 6409/4 LED with integrated battery can be installed in stand-by switching, continuous mode or in switchable stand-by switching. A weekly functional test and annual rated operating time test are performed automatically. The results are indicated by an LED.
- State-of-the-art LED technology with high luminous efficacy and long service life
- Extremely high luminaire efficacy
- Choice between a 1.5 h or 3.0 h rated operating time
- Luminous flux after 100,000 h still 90% of the starting luminous flux
- Optionally with DALI for controlling and monitoring the luminaire
- Weekly function test and annual rated operating time test
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS SERIES 6418/1
The safety light made of 6418/1 series sheet steel is used for emergency lighting and suitable for use in spraying and painting systems. The battery powers the emergency lighting for over 1.5 hours. In case of a defective lamp, it is disconnected. In operation, their robust construction means that they require minimal maintenance. With the right accessories, these high-quality luminaires are easy to install in a wide variety of ways in no time at all
- For use in Zones 2, 21 and 22
- Enclosure made from powdercoated sheet steel or stainless steel
- Central lock for opening and closing the luminaire plus a safety switch that disconnects the power supply at all poles when the luminaire is opened
- With weekly functional test and emergency lighting light duration test every six months
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS EXLUX SERIES 6409/5
The 6409 Series EXLUX emergency luminaire is suitable for use as safety lighting. It is lightweight and requires minimal maintenance. The external battery powers the emergency lighting for 1.5 or 3 hours. If one lamp is faulty, the luminaire switches to the working lamp. When the luminaire or battery case is opened, the battery circuit is disconnected. The robust plastic enclosure of the luminaire is easy to open thanks to the practical central lock.
- Can be used in Zones 2, 21 and 22
- Weekly function test and annual emergency light duration test
STAHL EMERGENCY LUMINAIRE WITH LED EXLUX SERIES 6009/4
The emergency luminaire with Series 6009/4 LED with integrated battery can be installed in stand-by switching, continuous mode or in switchable stand-by switching. A weekly functional test and annual rated operating time test are performed automatically. The results are indicated by an LED.
- The latest LED technology with a high luminous efficacy and a long service life
- Extremely high luminaire efficacy
- Can be adjusted from a 1.5 to a 3.0 h rated operating time
- Luminous flux after 100,000 h still 90% of the starting luminous flux
- Optionally with DALI for controlling and monitoring the luminaire
- Weekly functional test and annual rated operating time test
Reviews
There are no reviews yet.