STAHL HAND LAMP LED SERIES 6141/61
| Product Description: | Hand lamp |
| Product Type: | 6141/61-16 |
| Art. No.: | 203478 |
| WebCode: | 6141B |
| Availability | Available in stock |
- Powered by alkaline batteries so user not restricted by power point location
- Energy-saving LED technology
- Waterproof with IP68 (3 m, 30 min)
- Accessories for transportation
Related products
STAHL FLOODLIGHT LED SERIES 6125/2
The new generation of LED floodlights for Zone 1 also relies on the tried-and-tested, robust stainless steel enclosure (optionally seawater-resistant stainless steel 316L). However, thanks to their smaller design and a new generation of drivers, they weigh significantly less, thereby improving ergonomics during installation and operation. Now with three power classes and the three tried-and-tested light distribution curves, the LED floodlight generates three colours of LED light – warm white, neutral white and cold white.
- LED high-performance floodlight with a power consumption up to 225 W
- Wide voltage input between 110 V and 277 V (50 Hz and 60 Hz)
- Suitable for operation using central battery systems and mains DC (176 V to 264 V DC)
- Three power classes available: 100 W, 160 W and 225 W
- An enclosure made of 316L stainless steel is available for marine and offshore applications
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS EXLUX SERIES 6409/5
The 6409 Series EXLUX emergency luminaire is suitable for use as safety lighting. It is lightweight and requires minimal maintenance. The external battery powers the emergency lighting for 1.5 or 3 hours. If one lamp is faulty, the luminaire switches to the working lamp. When the luminaire or battery case is opened, the battery circuit is disconnected. The robust plastic enclosure of the luminaire is easy to open thanks to the practical central lock.
- Can be used in Zones 2, 21 and 22
- Weekly function test and annual emergency light duration test
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS EXLUX SERIES 6009/5
The 6009 series EXLUX emergency luminaire is suitable for use as safety lighting. It is lightweight and requires minimal maintenance. The battery is housed in the external enclosure and powers the emergency lighting for 1.5 or 3 hours. If one lamp is faulty, the luminaire switches to the working lamp. When the central lock is opened, the luminaire is always disconnected from the power supply at all poles.
- Can be used in Zones 1, 2, 21 and 22
- Two fluorescent lamps: 18 W and 36 W
- Weekly function test and annual emergency light duration test
STAHL FLOODLIGHT LED SERIES 6525/22 (EX EC)
The revised generation of LED floodlights for Zone 2 now includes a version with Ex ec type of protection especially for the European market. This eliminates the time-consuming vapour tightness test. The wide-range input now also meets the electrical installation conditions for global use. With an optional DALI interface, the floodlight paves the way to a digital lighting solution. Its extremely low start-up current can also support existing installations, as the circuit breakers that are already installed do not need to be replaced.
- Checked and approved in accordance with Ex ec type of protection, so vapour tightness test is not applicable
- Stainless steel enclosure as standard for a long service life and safety even under harsh ambient conditions
- Extremely wide range of ambient temperatures – between -60 °C and +60 °C
- Robust design with IK10 and IP66
- Wide-range input with optional 100 V to 277 V
- DALI versions available for lighting control, monitoring and switching
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS SERIES 6018/1
The safety light made of 6018/1 series sheet steel is used for emergency lighting and suitable for use in spraying and painting systems. The battery powers the emergency lighting over 1.5 or 3 hours. In case of a defective lamp, the luminaire switches to the working lamp. In operation, their robust construction means that they require minimal maintenance. With the right accessories, these high-quality luminaires are easy to install in a wide variety of ways in no time at all.
- For use in Zones 1, 2, 21 and 22
- Enclosure made from powdercoated sheet steel or stainless steel
- Central lock for opening and closing the luminaire plus a safety switch that disconnects the power supply at all poles when the luminaire is opened
- With weekly functional test and annual emergency lighting light duration test
STAHL FLOODLIGHT SERIES 6121/1
The 6121 series floodlight for conventional lamp technologies is ideal for lighting up large areas from elevated positions. Two different light distribution types offer added versatility to fulfil your lighting needs. For normal application areas, the floodlight is designed with a single powder coating and a bracket made from single-coated sheet steel. Each variant is optionally available with a double powder coating and double-coated bracket made from 316Lstainless steel specifically for offshore use.
- For use in gas group IIC
- Usable in the temperature range from -40 ... +60 °C
- Material: Enclosure made of cast aluminium, mounting components in stainless steel
- Lamp options: halogen lamps (QT) up to 500 W, halogen metal halide lamps (HIT) up to 400 W, sodium vapour high pressure lamps (HST) up to 400 W
STAHL LINEAR LUMINAIRE FOR FLUORESCENT LAMPS EXLUX SERIES 6401
The 6401 EXLUX luminaire is suited to normal indoor and outdoor lighting applications. In no time at all and with very little effort, using the accessories it can be fitted to the wall, ceiling or a pole, or alternatively, it can be suspended. The practical central lock is available with an optional switching element that disconnects the power supply at all poles when the plastic enclosure is opened. Lightweight yet strong: The high-quality workmanship makes this luminaire robust and minimises maintenance requirements.
- Can be used in Zone 2, 21 and 22
- Explosion-protected linear luminaire with two fluorescent lamps: 18 W, 36 W and 58 W
- Extremely robust: Impact strength rating of IK10
Reviews
There are no reviews yet.