Delvalle Portable Splitter Box Hazardous Areas
The Ex splitter box is designed for use in hazardous areas is to get two or more sockets as outputs by one current input, allowing this way us to use more than two plugs from a large distance to devices.
The splitter box is a secure device, comfortable and useful, which is protected thanks to an Atex & IECEx enclosure specially designed, water-proof, antirust and made in stainless steel AISI 304L which guarantees an IP66 protection. This enclosure is CE marked to the Atex Directive for safe use in zones 1 and 2 potentially explosive gas and zones 21 and 22 dust atmospheres, making it ideal for power distribution within hazardous area confined spaces.
To make easier the movement of this enclosure it has a handle on the cover, to move it to the right place.
Related products
Delvalle Ex Atex 19″ Rack
The increased-safety IP66 stainless steel Ex Rack 19″ enclosure Luxorex and Tibex stands out for its robustness and a very spacious interior.
For use in indoor and outdoor corrosive environments that require a water-tight seal, this enclosure’s seamless foam-in-place gasket and screw-down clamps provide a secure seal against contaminants and they are certified to be used at hazardous and Atex zones 1, 2, 21 & 22, it is greatly valued for its high security and resistance in the harshest environment.
The rack 19″ made of stainless steel AISI 304L or AISI 316L and with a polished glossy surface finish.
HOFMANN Aluminum Continuous Hinge with Clamps, Type 4X
The Continuous Hinge Aluminum Enclosure with Clamps is a lightweight, Type-4X solution that features a hinged cover that secures on the three, non-hinged sides via stainless steel clamps and screws. This enclosure is ideal for protection of components and controls in highly-corrosive indoor or outdoor environments such as petrochemical processing plants, sewage treatment plants, and marine environments.
Delvalle Pre-Installed Atex Junction Box
The terminal boxes Atex Terbox terminals are pre-assembled in stock, delivery time of 24 hours.
We have terminal boxes in three different materials (stainless steel, galvanized steel and GRP polyester) standardized, certified and ready for installation in explosive or corrosive zones 1, 2, 21 and 22.
Terminal boxes certified Atex and IECEx, installed and certified, ready for placement. Order it now and save money!
Delvalle Large ATEX Enclosures
Tribex Series is a Large stand Atex enclosures compact and waterproof IP66 made in stainless steel 304L & 316L.
Tribex is certified to be used at zones 1, 2, 21 & 22. It stands out for its high security and resistance in harsh environments.
we manufacture the most Large dimensions in the market; Atex & IECEx certified Enclosures 2000 x 2000 x 1000mm.
A spacious interior with great capacity simplifies connection operations.
EC type marking of component: II2G Ex e IIC Gb and II2D Ex tb IIIC Db IP66.
We manufacture large standing enclosures in 1,5, 2 and 3mm thickness, Atex & IECEx certified.
Delvalle AC Contactor Modules Atex
The AC contactor modules Atex & IECEx, are devices to control circuits or motor circuits permiting or not allowing the operation of the circuit. These contactor can be used in branch circuits to control lighting, heating, appliances, motors and similar circuits.
These contactors guarantee the safety of the technical staff who work with them, because these contactors can work at really high or low currents. In addition these devices are far from the controlled equipment, thus increasing safety.
Enclosed in a waterproof antirust box with AISI 304L stainless steel. This design allows use of the device in protected spaces with high explosion risk, so obtaining, the “Ex e” and “Ex d” protection for use in potentially explosive atmospheres of dust and gas.
These contactors guarantee the safety of the technical staff who work with them, because these contactors can work at really high or low currents. In addition these devices are far from the controlled equipment, thus increasing safety.
Enclosed in a waterproof antirust box with AISI 304L stainless steel. This design allows use of the device in protected spaces with high explosion risk, so obtaining, the “Ex e” and “Ex d” protection for use in potentially explosive atmospheres of dust and gas.
Tepex Junction ATEX Boxes RK 01
Tepex Junction ATEX
Specification
CONSTRUCTION
Enclosure: PA glass fiber reinforced polyamide, color – black
Cover: PA glass fiber reinforced polyamide with integrated thermoplastic elastomer gasket,
closes with four M5 stainless steel screws.
Apparatus category: II 2GD
Explosion protection: Ex eb IIC T6 Gb
Ex ia/ib IIC T6 Gb
Ex tb IIIC T80°C Db
Enviroment temperature: -20ºC ≤ Ta ≤ +50ºC, Ta ≤ +70ºC for Exi [ATEX]
-50ºC ≤ Ta ≤ +50ºC [EAC]
Degree of protection: IP66
Rated insulation voltage: 630 VAC
60 V (Exi)
Delvalle IP67 Ex ATEX Terminal & Junction Box
Terbox-Geoex IP67 Series of terminal boxes are made of stainless steel; based on the design and specifications of our Geoex boxes (which are Ex-certified as final product). Terbox can be used in projects requiring the assembly and certification of junction boxes with terminal, cable glands and push-buttons, giving cost and time savings.
Terminal boxes are used for dividing and connecting wires for various electrical apparatus and instruments in the circuits. Installation is certified for zones 1, 2, 21 and 22.
CUSTOM MADE PROJECTS: Options available include sizes, colours, types of connection among others. As we have a close relationship with the main Atex & IECEx certified companies in our field, we achieve total adaptability and flexibility being manufacturers.
Reviews
There are no reviews yet.