APPLETON Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles

Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles provide explosionproof protection for stationary or portable equipment in hazardous, damp or corrosive locations. It features delayed action construction; to operate, insert plug to first stop, move Slide-Lok™ slide to the right and push plug fully forward to energize. The Contender CPS meets all UL and CSA requirements for ground fault protection in hazardous locations when the GFCI cover is used.

Features

Covers are UL Classified for use with Crouse-Hinds™ CPP516 plug
Plug mechanical cable clamps prevent strain on cables – they meet or exceed UL strain relief pull-out requirements
Insulators provide superior dielectric and mechanical strength and lowest arc tracking
Delayed action construction: insert plug partially rotate slide on front of receptacle and insert plug fully
Factory sealed: external seals not required
Plug and receptacles are supplied with pressure terminal connectors

Specifications

Hazardous Area Classification: Class I, Division 1 and 2, Groups C, D

Amperage: 20

Voltage: 125-250 Vac or 18 Vdc

Number of Poles: 3

Number of Wires: 2

Horsepower Ratings: 1

Plug Cable Diameter: .538 – .639

Mounting Box Entries: Dead-End or Feed-Thru

Materials and Finishes: Receptacle cover and CPP plug is copperfree (4/10 of 1% max.) aluminum with epoxy powder coat. Mounting box is malleable iron with triple-coat. Insulating blocks are fiberglass reinforced polyester.