APPLETON EF and FHS Series Flexible Hangers

U-Line™ ECCL/ECC Factory Sealed 20 Amp Cable Connectors provide an easy way to extend the reach of your power supply to areas where a standard or U-Line™ receptacle may not be available. A gasket in the throat of the cable connector seals around the U-Line plug powering your equipment, protecting against moisture and combustible dusts. A twist with an audible click locks the plug in place and energizes the connector. When not in use, a spring cover seals the connector against the environmental elements.

EBR Interlocked Circuit Breaker Receptacle for Portable Electrical Equipment provides power for electrical equipment used in hazardous, damp, wet or corrosive locations. The interlock feature mechanically locks the plug in place when the circuit breaker is in the ON position, ensuring that contacts cannot be made or broken under load. The circuit breaker also provides short circuit and thermal time delay overload protection to safeguard valuable equipment against expensive damage.

BKX Rigid Fixture Hangers are designed for the suspension of lighting fixtures. They are available in three depths, all furnished with gasketed cover, four threaded conduit entries and 2 close-up plugs

Contender™ CPS Factory Sealed 20 Amp Pin and Sleeve Receptacles provide explosionproof protection for stationary or portable equipment in hazardous, damp or corrosive locations. It features delayed action construction; to operate, insert plug to first stop, move Slide-Lok™ slide to the right and push plug fully forward to energize. The Contender CPS meets all UL and CSA requirements for ground fault protection in hazardous locations when the GFCI cover is used.