Delvalle Explosion Proof Flameproof ATEX Enclosure Ex d EJB
EJB Series flameproof connection boxes with window are suitable for installations in areas where there are risks of explosion, and also at places where dust or combustible gases are present. Ideal to interconnect the wires and to accommodate a vast variety of equipment and instruments. The enclosures are equipped with a lid with flanged joints, on which a rectangular window or a porthole, made with tempered glass and internal or external frames, may be created to be able to see the instruments located inside.
Let us help you!
Related products
Delvalle Control Desk Atex & IECEx
This Atex & IECEx desk allows the control of many Atex & IECEx components and devices from control panel thanks to the easy control with selectors, push buttons, buttons with key, viewers, red mushrooms, alarms, light signals…
Its use is for industries zones with explosion risk, oil & gas and petro chemical industries.
It’s based on the component placement, which is designed according to the customer needs to get a desk with a high view, comfort and control. Every component has Atex & IECEx certification.
This Atex & IECEx desk has been designed specifically as an anticorrosion and waterproof desk, made of stainless steel AISI 304L or AISI 316L, allowing its use in zones with high explosion or corrosion risk. Besides, it guarantees an IP66 protection.
Delvalle Ex Atex 19″ Rack
The increased-safety IP66 stainless steel Ex Rack 19″ enclosure Luxorex and Tibex stands out for its robustness and a very spacious interior.
For use in indoor and outdoor corrosive environments that require a water-tight seal, this enclosure’s seamless foam-in-place gasket and screw-down clamps provide a secure seal against contaminants and they are certified to be used at hazardous and Atex zones 1, 2, 21 & 22, it is greatly valued for its high security and resistance in the harshest environment.
The rack 19″ made of stainless steel AISI 304L or AISI 316L and with a polished glossy surface finish.
HOFFMAN CUF Solar Combiner Box
Commercial Tranistion Boxes, CUF Series solar, also known as pass through boxes, provide a convenient location for transitioning wires in a commercial array when fusing is not required. The number of circuit input pairs is 4 to 20 with wire size input and output of #24 - #3 AWG. Housed in a fiberglass enclosure offering unparalleled exterior protection against the elements.
HOFMANN Aluminum Continuous Hinge with Clamps, Type 4X
The Continuous Hinge Aluminum Enclosure with Clamps is a lightweight, Type-4X solution that features a hinged cover that secures on the three, non-hinged sides via stainless steel clamps and screws. This enclosure is ideal for protection of components and controls in highly-corrosive indoor or outdoor environments such as petrochemical processing plants, sewage treatment plants, and marine environments.
Delvalle AC Contactor Modules Atex
The AC contactor modules Atex & IECEx, are devices to control circuits or motor circuits permiting or not allowing the operation of the circuit. These contactor can be used in branch circuits to control lighting, heating, appliances, motors and similar circuits.
These contactors guarantee the safety of the technical staff who work with them, because these contactors can work at really high or low currents. In addition these devices are far from the controlled equipment, thus increasing safety.
Enclosed in a waterproof antirust box with AISI 304L stainless steel. This design allows use of the device in protected spaces with high explosion risk, so obtaining, the “Ex e” and “Ex d” protection for use in potentially explosive atmospheres of dust and gas.
These contactors guarantee the safety of the technical staff who work with them, because these contactors can work at really high or low currents. In addition these devices are far from the controlled equipment, thus increasing safety.
Enclosed in a waterproof antirust box with AISI 304L stainless steel. This design allows use of the device in protected spaces with high explosion risk, so obtaining, the “Ex e” and “Ex d” protection for use in potentially explosive atmospheres of dust and gas.
Delvalle Atex Junction Box IP68
The increased-safety Geoex Series IP68 junction box is made in either AISI 304L or 316L stainless steel.
Certified to be used in zones 1, 2, 21 and 22, it is greatly valued for its high security and resistance even in the harshest environments.
We can make it to any dimension required by our customers, up to a maximum size of 1000 x 1000 x 1000 mm.
TURNKEY PROJECTS: Options available include sizes, colours, types of connection among others. As we have a close relationship with the main Atex & IECEx certified companies in our field, we achieve total adaptability and flexibility being manufacturers.
Delvalle Atex Marshalling ATEX Boxes Kiosks IP66
Delvalle is a world-class manufacturer hazardous area Marshalling / Distribution Box for deployment in refineries and chemical plants and many other hazardous area applications and Marshalling Box for heat tracing. Ex Marshalling panels provide cross wiring functionality between field instruments and the control system.
Delvalle Pre-Installed Atex Junction Box
The terminal boxes Atex Terbox terminals are pre-assembled in stock, delivery time of 24 hours.
We have terminal boxes in three different materials (stainless steel, galvanized steel and GRP polyester) standardized, certified and ready for installation in explosive or corrosive zones 1, 2, 21 and 22.
Terminal boxes certified Atex and IECEx, installed and certified, ready for placement. Order it now and save money!
Reviews
There are no reviews yet.