Click to enlarge
Previous product
APPLETON Areamaster™ 1000 Floodlights (For Hazardous Locations)
APPLETON Areamaster™ 1000 Floodlights (For Hazardous Locations)
Back to products
Next product
APPLETON Code•Master™ 2 HID Factory Sealed Floodlights
APPLETON Code•Master™ 2 HID Factory Sealed Floodlights

APPLETON EF Series Explosionproof Floodlights

Compare
Add to wishlist
Categories: ,
Appleton
Description

Features

  • Typical applications include Class I, Groups C and D locations such as aircraft service areas, oil and gas loading docks, distilleries
  • Easy to carry, portable model with wheelbase has handle for convenient carrying, built-on wrench allowing 135° vertical adjustment. Weighs 8.6 kgs (19 lbs)
  • External cable on portable wheelbase unit (not furnished) should be 3-conductor No. 16 A.W.G. type S or SO rubber covered cable. Service end of cord should be equipped with a 2-wire, 3-pole explosionproof plug for connecting to an explosionproof receptac
  • Terminal block has pressure terminal for connecting rubber covered cable to floodlight. Cable Connector takes a 9.5 to 12.7 mm (.375 in to .500 in) outside diameter cord. Sizes up to 15.9 mm (.625 in) diameter are available on special order
  • Permanent base model has explosionproof junction wiring chamber with 19.1 mm (3/4 in) horizontal feed-thru hubs. Vertical adjustment to 135°; horizontal to 345°
  • Withstands 500 hours of salt-spray test (Per MIL-F-8115C)

Specifications

NEC Certifications and Compliances for 150 W
Class I, Groups C, D (PAR-38 or R-40 reflector lamps)
NEC Certifications and Compliances for 300 W
Class I, Group D (R-40 reflector lamps)
Specific Wattages
150W incandescent medium base PAR-38 (T3C) projector spot or flood; 150W incandescent medium base R-40 (T2C) reflector spot or flood; 300W incandescent medium base R-40 (T2C) reflector spot or flood
Standard Materials and Finishes
Housing, wheelbase, yoke and wiring compartment are aluminum with an enamel finish. Lens is thermal shock and impact resistant glass
Brand

Brand

Appleton

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “APPLETON EF Series Explosionproof Floodlights”

Your email address will not be published. Required fields are marked *

Related products

Compare
Close

STAHL C-LUX 6109 SERIES COMPACT EMERGENCY LUMINAIRES

C-LUX 6109 series compact emergency luminaires can be used for emergency lighting, as well as for indication or escape route luminaires.

  • Suitable for wall, ceiling and suspended mounting
  • Operating modes: Continuous mode, continuous mode with switchable emergency lighting
  • With function and rated operating time test with optional DALI technology
  • Large recognition range d ≥ 30 m
  • Emergency exit signs with suspended panel so that they can be read from both sides
  • Lightweight, robust and compact design
Add to wishlist
Read more
Quick view
Compare
Close

STAHL EMERGENCY LUMINAIRE WITH LED EXLUX SERIES L409/4

The EXLUX L409/4 light fitting completes the LED linear luminaire range. The industrial design of the emergency luminaires offers all the advantages of the robust enclosure technology and long-lasting LED technology for which the EXLUX range is known. This automatically starts all test functions set out as mandatory in standards and the ergonomic light fitting device provides clear signals. The entire range of installation material for the EXLUX family is also available.

  • Long-lasting LED version of the EXLUX family in an industrial design
  • Robust, durable enclosure with central lock for use as humidor lighting
  • Integrated, automatically started test function for the integrated battery
  • Up to 3 hours battery runtime with a luminous flux of 1000 lm in emergency operation
  • Available with warm white, neutral white and cold white colour temperatures
Add to wishlist
Read more
Quick view
Compare
Close

STAHL LINEAR LUMINAIRE FOR FLUORESCENT LAMPS SHEET STEEL SERIES 6414/1

  • Can be used in Zones 2, 21 and 22
  • Central lock for opening and closing the luminaire
  • Enclosure made from powder-coated sheet steel or stainless steel
Add to wishlist
Read more
Quick view
Compare
Close

STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS EXLUX SERIES 6009/5

The 6009 series EXLUX emergency luminaire is suitable for use as safety lighting. It is lightweight and requires minimal maintenance. The battery is housed in the external enclosure and powers the emergency lighting for 1.5 or 3 hours. If one lamp is faulty, the luminaire switches to the working lamp. When the central lock is opened, the luminaire is always disconnected from the power supply at all poles.

  • Can be used in Zones 1, 2, 21 and 22
  • Two fluorescent lamps: 18 W and 36 W
  • Weekly function test and annual emergency light duration test
Add to wishlist
Read more
Quick view
Compare
Close

STAHL FLOODLIGHT LED SERIES 6125/2

The new generation of LED floodlights for Zone 1 also relies on the tried-and-tested, robust stainless steel enclosure (optionally seawater-resistant stainless steel 316L). However, thanks to their smaller design and a new generation of drivers, they weigh significantly less, thereby improving ergonomics during installation and operation. Now with three power classes and the three tried-and-tested light distribution curves, the LED floodlight generates three colours of LED light – warm white, neutral white and cold white.

  • LED high-performance floodlight with a power consumption up to 225 W
  • Wide voltage input between 110 V and 277 V (50 Hz and 60 Hz)
  • Suitable for operation using central battery systems and mains DC (176 V to 264 V DC)
  • Three power classes available: 100 W, 160 W and 225 W
  • An enclosure made of 316L stainless steel is available for marine and offshore applications
Add to wishlist
Read more
Quick view
Compare
Close

STAHL FLOODLIGHT LED SERIES 6525/22 (EX EC)

The revised generation of LED floodlights for Zone 2 now includes a version with Ex ec type of protection especially for the European market. This eliminates the time-consuming vapour tightness test. The wide-range input now also meets the electrical installation conditions for global use. With an optional DALI interface, the floodlight paves the way to a digital lighting solution. Its extremely low start-up current can also support existing installations, as the circuit breakers that are already installed do not need to be replaced.

  • Checked and approved in accordance with Ex ec type of protection, so vapour tightness test is not applicable
  • Stainless steel enclosure as standard for a long service life and safety even under harsh ambient conditions
  • Extremely wide range of ambient temperatures – between -60 °C and +60 °C
  • Robust design with IK10 and IP66
  • Wide-range input with optional 100 V to 277 V
  • DALI versions available for lighting control, monitoring and switching
Add to wishlist
Read more
Quick view
Compare
Close

HOFFMAN Straight Section, Feed-Through SS Hinged-Cover, Type 4X

Feed-Through Stainless Steel Hinged-Cover, Type 4X Straight Sections are used for enclosing wire and cable in wireway runs. Its water-proof and stainless steel features makes it suitable for frequently hosed down, very wet or highly corrosive applications. The traditional closed-loop design has an opening on one side for easy access to wires and cables. Sections are available in lengths from 12 inch to 120 inch.
Add to wishlist
Read more
Quick view
Compare
Close

STAHL LINEAR LUMINAIRE FOR FLUORESCENT LAMPS SHEET STEEL SERIES 6012/1

Art. No.: 224800 Product Type: 6012/1112-2951-1100-11 Art. No.: 226382 Product Type: 6012/1116-2951-1100-11 Art. No.: 226397 Product Type: 6012/1124-4951-1100-14 Art. No.:
Add to wishlist
Read more
Quick view