- Increased safety. Ideal for indoor and outdoor use in wet or corrosive atmospheres
- Designed for Zones 1 or 2 areas, where flammable gases or vapors are present either continuously, often or accidentally such as petroleum and chemical facilities, refineries and other industrial process facilities
- Designed for use in Zones 21 or 22 areas where flammables dusts (conductive and non conductive) are present either continuously, often or accidentally such as food processing facilities, dairy facilities, brewing facilities, pharmaceutical facilities, and other commercial facilities
- JBES Series terminal junction boxes are designed for low voltage electrical and instrumentation connections in hazardous areas
- ECES Series enclosures are for distribution and control applications. They can be customized at our workshop to house a large range of components; i.e. control units, switches, breakers, transformers, meters, etc.
- Refer to catalog pages to define permitted number of cable entries, number if terminal blocks, and maximum current of terminals for selected junction boxes
- Provided with feed-thru earth grounding stud and poured-in-place polyurethane door gasket
- Hinges standard on all sizes above 370.0 mm x 260.0 mm (14.57″ x 10.24″). Reversible door, opens 210°, from any location top; bottom, left or right, by means of removable hinges that can be installed in any position
- Reversible anti-vibration mounting brackets can be mounted on the top, bottom or side positions
- Can be supplied with 1, 2, 3 or 4 neoprene sealed gland plates for ease of cable installation. Optional removable padlocking device
Appleton™ JBES and ECES 316L ATEx Stainless Steel Enclosures
Appleton™ increased safety ATX™ JBES and ECES Series 316L stainless steel enclosures memiliki tingkat ketahanan korosi yang sangat tinggi dan cocok untuk digunakan di lokasi berbahaya terklasifikasi yang terpapar gas, uap, atau debu yang mudah terbakar dan meledak.
Appleton seri JBES dirancang untuk koneksi listrik dan instrumentasi tegangan rendah, sedangkan Seri ECES dirancang untuk aplikasi distribusi dan kontrol.
ATEX/IECEx Certifications & Compliance Zone 1 and 2 – 21 and 22; Ex II 2 GD ; IP66; IK10 ; EURASEC and INMETRO
Standard Materials 316L stainless steel enclosure and hardware
Accesories Mounting pan, rail mounting, padlocking device, door locking bracket for easy access and inside pocket are available. See catalog pages for details
JBe Zones 1 and 2 Temperature Class T6 to T4
JBe Zones 21 and 22 Surface Temperature T80 °C to T130 °C (T176 °F to T266 °F)
JBe/U/ JBES/ ECES Ambient Temperature
-50 °C to +70 °C (-58 °F to +158 °F)
-40 °C to +70 °C ( -40 °F to +158 °F)
-50 °C to +70 °C (-58 °F to +158 °F)
-50 °C to +55 °C (-58 °F to +131 °F)
Description
Brand
Brand
Appleton
Related products
Delvalle Atex Junction Box IP67
The increased-safety Geoex Series IP67 junction box is made in either AISI 304L or 316L stainless steel.
Certified to be used in zones 1, 2, 21 and 22, it is greatly valued for its high security and resistance even in the harshest environments.
We can make it to any dimension required by our customers, up to a maximum size of 1000 x 1000 x 1000 mm.
TURNKEY PROJECTS: Options available include sizes, colours, types of connection among others. As we have a close relationship with the main Atex & IECEx certified companies in our field, we achieve total adaptability and flexibility being manufacturers.
Delvalle Control Desk Atex & IECEx
This Atex & IECEx desk allows the control of many Atex & IECEx components and devices from control panel thanks to the easy control with selectors, push buttons, buttons with key, viewers, red mushrooms, alarms, light signals…
Its use is for industries zones with explosion risk, oil & gas and petro chemical industries.
It’s based on the component placement, which is designed according to the customer needs to get a desk with a high view, comfort and control. Every component has Atex & IECEx certification.
This Atex & IECEx desk has been designed specifically as an anticorrosion and waterproof desk, made of stainless steel AISI 304L or AISI 316L, allowing its use in zones with high explosion or corrosion risk. Besides, it guarantees an IP66 protection.
Delvalle Galva Ex Push Buttons
Atex & IECEx certified push buttons and control boxes they are specially designed to perform checks, maneuvers and as actuators in explosive atmospheres.
Offering customers great combinations and flexibility; they have a rugged, anti-corrosion system and finished, painted galvanized steel surface finish in RAL 9005.
They it allows you to perform maneuvers and automation controls at the machine in hazardous areas control. Select the components that best suit your operator panels, keypads, mushrooms, switches, HMI,… and we assemble all with Atex certified Ex, IECEx and UL. We have huge stock for immediate delivery!
Delvalle Pre-Installed Atex Junction Box
The terminal boxes Atex Terbox terminals are pre-assembled in stock, delivery time of 24 hours.
We have terminal boxes in three different materials (stainless steel, galvanized steel and GRP polyester) standardized, certified and ready for installation in explosive or corrosive zones 1, 2, 21 and 22.
Terminal boxes certified Atex and IECEx, installed and certified, ready for placement. Order it now and save money!
Delvalle Flameproof ATEX Enclosure Ex d EJB
EJB Series flameproof connection boxes are suitable for installations in areas where there are risks of explosion and also at places where dust or combustible gases are present.
They are classified for Zones 1, 2, 21 and 22. IP66 degree of protection. Available in aluminum or stainless steel AISI 316L (EJBX Series).
Order it now and save money!
Delvalle Portable Splitter Box Hazardous Areas
The Ex splitter box is designed for use in hazardous areas is to get two or more sockets as outputs by one current input, allowing this way us to use more than two plugs from a large distance to devices.
The splitter box is a secure device, comfortable and useful, which is protected thanks to an Atex & IECEx enclosure specially designed, water-proof, antirust and made in stainless steel AISI 304L which guarantees an IP66 protection. This enclosure is CE marked to the Atex Directive for safe use in zones 1 and 2 potentially explosive gas and zones 21 and 22 dust atmospheres, making it ideal for power distribution within hazardous area confined spaces.
To make easier the movement of this enclosure it has a handle on the cover, to move it to the right place.
The splitter box is a secure device, comfortable and useful, which is protected thanks to an Atex & IECEx enclosure specially designed, water-proof, antirust and made in stainless steel AISI 304L which guarantees an IP66 protection. This enclosure is CE marked to the Atex Directive for safe use in zones 1 and 2 potentially explosive gas and zones 21 and 22 dust atmospheres, making it ideal for power distribution within hazardous area confined spaces.
To make easier the movement of this enclosure it has a handle on the cover, to move it to the right place.
Delvalle Ex Push Button Station Contrex
We manufacture stainless steel AISI 304 and AISI 316L control station Atex control boxes. They are specially designed to perform checks, maneuvers and as actuators in explosive atmospheres.
Wide variety of sizes and functions, available as standard products for quick supply and as custom built parts to meet the users‘ exact requirement.
We have three models in the Contrex Series:
Control stations screw closure (Contrex-Geoex Series)
Hinged terminal & junction boxes (Contrex-Luxorex Series)
High capacity & junction boxes (Contrex-Tribex Series)
Reviews
There are no reviews yet.