Delvalle Portable Splitter Box Hazardous Areas
The Ex splitter box is designed for use in hazardous areas is to get two or more sockets as outputs by one current input, allowing this way us to use more than two plugs from a large distance to devices.
The splitter box is a secure device, comfortable and useful, which is protected thanks to an Atex & IECEx enclosure specially designed, water-proof, antirust and made in stainless steel AISI 304L which guarantees an IP66 protection. This enclosure is CE marked to the Atex Directive for safe use in zones 1 and 2 potentially explosive gas and zones 21 and 22 dust atmospheres, making it ideal for power distribution within hazardous area confined spaces.
To make easier the movement of this enclosure it has a handle on the cover, to move it to the right place.
Related products
HOFMANN Aluminum Continuous Hinge with Clamps, Type 4X
The Continuous Hinge Aluminum Enclosure with Clamps is a lightweight, Type-4X solution that features a hinged cover that secures on the three, non-hinged sides via stainless steel clamps and screws. This enclosure is ideal for protection of components and controls in highly-corrosive indoor or outdoor environments such as petrochemical processing plants, sewage treatment plants, and marine environments.
Delvalle Explosion Proof Flameproof ATEX Enclosure Ex d EJB
EJB Series flameproof connection boxes with window are suitable for installations in areas where there are risks of explosion, and also at places where dust or combustible gases are present. Ideal to interconnect the wires and to accommodate a vast variety of equipment and instruments. The enclosures are equipped with a lid with flanged joints, on which a rectangular window or a porthole, made with tempered glass and internal or external frames, may be created to be able to see the instruments located inside.
Let us help you!
Delvalle AC Contactor Modules Atex
The AC contactor modules Atex & IECEx, are devices to control circuits or motor circuits permiting or not allowing the operation of the circuit. These contactor can be used in branch circuits to control lighting, heating, appliances, motors and similar circuits.
These contactors guarantee the safety of the technical staff who work with them, because these contactors can work at really high or low currents. In addition these devices are far from the controlled equipment, thus increasing safety.
Enclosed in a waterproof antirust box with AISI 304L stainless steel. This design allows use of the device in protected spaces with high explosion risk, so obtaining, the “Ex e” and “Ex d” protection for use in potentially explosive atmospheres of dust and gas.
These contactors guarantee the safety of the technical staff who work with them, because these contactors can work at really high or low currents. In addition these devices are far from the controlled equipment, thus increasing safety.
Enclosed in a waterproof antirust box with AISI 304L stainless steel. This design allows use of the device in protected spaces with high explosion risk, so obtaining, the “Ex e” and “Ex d” protection for use in potentially explosive atmospheres of dust and gas.
Tepex Junction ATEX Boxes RK 01
Tepex Junction ATEX
Specification
CONSTRUCTION
Enclosure: PA glass fiber reinforced polyamide, color – black
Cover: PA glass fiber reinforced polyamide with integrated thermoplastic elastomer gasket,
closes with four M5 stainless steel screws.
Apparatus category: II 2GD
Explosion protection: Ex eb IIC T6 Gb
Ex ia/ib IIC T6 Gb
Ex tb IIIC T80°C Db
Enviroment temperature: -20ºC ≤ Ta ≤ +50ºC, Ta ≤ +70ºC for Exi [ATEX]
-50ºC ≤ Ta ≤ +50ºC [EAC]
Degree of protection: IP66
Rated insulation voltage: 630 VAC
60 V (Exi)
Delvalle Flameproof ATEX Enclosure Ex d EJB
EJB Series flameproof connection boxes are suitable for installations in areas where there are risks of explosion and also at places where dust or combustible gases are present.
They are classified for Zones 1, 2, 21 and 22. IP66 degree of protection. Available in aluminum or stainless steel AISI 316L (EJBX Series).
Order it now and save money!
Delvalle Stainless Steel ATEX Junction Boxes IP66
Stainless steel Ex E terminal and junction boxes “Terbox Series”, has been developed for installations in hazardous areas 1, 2, 21 and 22 and corrosion areas, for installation of signal and power distribution networks in hazardous areas.
We have diferents door types; screw closure, hinged enclosures, and stand large capacity enclosures.They are certified according to the latest Atex and other international standards, types of explosion protection include Ex e, Ex ia and Ex tb.
TURNKEY PROJECTS. Options available include sizes, colours, types of connection among others.
Delvalle Large ATEX Enclosures
Tribex Series is a Large stand Atex enclosures compact and waterproof IP66 made in stainless steel 304L & 316L.
Tribex is certified to be used at zones 1, 2, 21 & 22. It stands out for its high security and resistance in harsh environments.
we manufacture the most Large dimensions in the market; Atex & IECEx certified Enclosures 2000 x 2000 x 1000mm.
A spacious interior with great capacity simplifies connection operations.
EC type marking of component: II2G Ex e IIC Gb and II2D Ex tb IIIC Db IP66.
We manufacture large standing enclosures in 1,5, 2 and 3mm thickness, Atex & IECEx certified.
Delvalle Ex Atex 19″ Rack
The increased-safety IP66 stainless steel Ex Rack 19″ enclosure Luxorex and Tibex stands out for its robustness and a very spacious interior.
For use in indoor and outdoor corrosive environments that require a water-tight seal, this enclosure’s seamless foam-in-place gasket and screw-down clamps provide a secure seal against contaminants and they are certified to be used at hazardous and Atex zones 1, 2, 21 & 22, it is greatly valued for its high security and resistance in the harshest environment.
The rack 19″ made of stainless steel AISI 304L or AISI 316L and with a polished glossy surface finish.
Reviews
There are no reviews yet.