| Art. No.: | 225000 | Product Type: | L148/1111-100 |
| Art. No.: | 225779 | Product Type: | L148/1111-111 |
STAHL PORTABLE LAMPS LED SERIES L148
The L148 series LED portable lamp for use in non-hazardous areas is ergonomically designed to enable you to operate it with one hand. Its brightness can also be freely adjusted. Switching it to flashing mode allows you to use it as a signal beacon if required. Coloured diffusing lenses are available as accessories for this. The pivoting lamp head allows you to direct the light cone virtually anywhere. The portable lamp is approved for use in vehicles, and when connected to the charging unit, has an emergency lighting function.
- For use in the safe area
- Latest LED technology
- Very high light intensity
- Low weight
- Lamp head pivoting by 190°
- Main light continuously dimmable
- Long battery life
- Ergonomic one-hand operation
Description
Brand
Brand
Stahl
Related products
STAHL FLOODLIGHT LED SERIES 6525/22 (EX EC)
The revised generation of LED floodlights for Zone 2 now includes a version with Ex ec type of protection especially for the European market. This eliminates the time-consuming vapour tightness test. The wide-range input now also meets the electrical installation conditions for global use. With an optional DALI interface, the floodlight paves the way to a digital lighting solution. Its extremely low start-up current can also support existing installations, as the circuit breakers that are already installed do not need to be replaced.
- Checked and approved in accordance with Ex ec type of protection, so vapour tightness test is not applicable
- Stainless steel enclosure as standard for a long service life and safety even under harsh ambient conditions
- Extremely wide range of ambient temperatures – between -60 °C and +60 °C
- Robust design with IK10 and IP66
- Wide-range input with optional 100 V to 277 V
- DALI versions available for lighting control, monitoring and switching
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS EXLUX SERIES 6009/5
The 6009 series EXLUX emergency luminaire is suitable for use as safety lighting. It is lightweight and requires minimal maintenance. The battery is housed in the external enclosure and powers the emergency lighting for 1.5 or 3 hours. If one lamp is faulty, the luminaire switches to the working lamp. When the central lock is opened, the luminaire is always disconnected from the power supply at all poles.
- Can be used in Zones 1, 2, 21 and 22
- Two fluorescent lamps: 18 W and 36 W
- Weekly function test and annual emergency light duration test
STAHL LINEAR LUMINAIRE WITH LED EXLUX SERIES 6402/4
- State-of-the-art LED technology with high luminous efficacy and long service life
- Extremely high luminaire efficacy
- Luminous flux after 100,000 h still 90% of the starting luminous flux
- Optionally with DALI for controlling and monitoring the luminaire
- Optionally with address modules for directly actuation of a common battery system
STAHL C-LUX 6109 SERIES COMPACT EMERGENCY LUMINAIRES
C-LUX 6109 series compact emergency luminaires can be used for emergency lighting, as well as for indication or escape route luminaires.
- Suitable for wall, ceiling and suspended mounting
- Operating modes: Continuous mode, continuous mode with switchable emergency lighting
- With function and rated operating time test with optional DALI technology
- Large recognition range d ≥ 30 m
- Emergency exit signs with suspended panel so that they can be read from both sides
- Lightweight, robust and compact design
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS SERIES 6418/1
The safety light made of 6418/1 series sheet steel is used for emergency lighting and suitable for use in spraying and painting systems. The battery powers the emergency lighting for over 1.5 hours. In case of a defective lamp, it is disconnected. In operation, their robust construction means that they require minimal maintenance. With the right accessories, these high-quality luminaires are easy to install in a wide variety of ways in no time at all
- For use in Zones 2, 21 and 22
- Enclosure made from powdercoated sheet steel or stainless steel
- Central lock for opening and closing the luminaire plus a safety switch that disconnects the power supply at all poles when the luminaire is opened
- With weekly functional test and emergency lighting light duration test every six months
STAHL LINEAR LUMINAIRE FOR FLUORESCENT LAMPS ECOLUX METAL SERIES L610/1 (DISCONTINUED)
The L610/1 series ECOLUX METALL linear luminaire is designed for industrial use and is suited to general lighting applications in harsh environments with tough demands. In no time at all and with very little effort, it can be fitted to the wall or ceiling. And thanks to the quick-release locks, the translucent cover is easy to open. The high-quality workmanship makes it robust and minimises maintenance requirements.
- Highly resistant industrial design
- Two fluorescent lamps: 18 W and 36 W
- Enclosure made from sheet steel or SS304/SS316L stainless steel (suitable for use in marine environments)
HOFFMAN Hazardous Location LED Lights, Strip
Hazardous Location LED Strip Lights provide enclosure illumination in hazardous environments. These lights are ideal for remote and darkened enclosure applications in Class 1, Division 2 hazardous areas. With a robust design, these lights have a life span of 100,000 hours and superior lighting performance with easy field angle adjustment brackets. These versatile, light-weight LED lights provide mounting flexibility and are easy to install in an enclosure.
Reviews
There are no reviews yet.