| Art. No.: | 287810 | Product Type: | 6109/111-0101-160-0111-31-1850-H21 |
| Art. No.: | 287816 | Product Type: | 6109/111-0111-180-0111-31-1850-A11 |
| Art. No.: | 287814 | Product Type: | 6109/111-0101-160-0111-31-A850-001 |
STAHL C-LUX 6109 SERIES COMPACT EMERGENCY LUMINAIRES
C-LUX 6109 series compact emergency luminaires can be used for emergency lighting, as well as for indication or escape route luminaires.
- Suitable for wall, ceiling and suspended mounting
- Operating modes: Continuous mode, continuous mode with switchable emergency lighting
- With function and rated operating time test with optional DALI technology
- Large recognition range d ≥ 30 m
- Emergency exit signs with suspended panel so that they can be read from both sides
- Lightweight, robust and compact design
Description
Brand
Brand
Stahl
Related products
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS SERIES 6018/1
The safety light made of 6018/1 series sheet steel is used for emergency lighting and suitable for use in spraying and painting systems. The battery powers the emergency lighting over 1.5 or 3 hours. In case of a defective lamp, the luminaire switches to the working lamp. In operation, their robust construction means that they require minimal maintenance. With the right accessories, these high-quality luminaires are easy to install in a wide variety of ways in no time at all.
- For use in Zones 1, 2, 21 and 22
- Enclosure made from powdercoated sheet steel or stainless steel
- Central lock for opening and closing the luminaire plus a safety switch that disconnects the power supply at all poles when the luminaire is opened
- With weekly functional test and annual emergency lighting light duration test
STAHL FLOODLIGHT SERIES 6521/4
Series 6521/4 explosion protected floodlight for use in explosive gas atmospheres of Zone 2 as well as in areas with combustible dust of Zone 21 and Zone 22.
- Enclosure available made of stainless steel V4A, V2A or sheet steel, coated
- Broad or narrow beam reflectors or asymmetrical light distribution, standard: broad beam
STAHL EMERGENCY LUMINAIRE FOR FLUORESCENT LAMPS EXLUX SERIES 6409/5
The 6409 Series EXLUX emergency luminaire is suitable for use as safety lighting. It is lightweight and requires minimal maintenance. The external battery powers the emergency lighting for 1.5 or 3 hours. If one lamp is faulty, the luminaire switches to the working lamp. When the luminaire or battery case is opened, the battery circuit is disconnected. The robust plastic enclosure of the luminaire is easy to open thanks to the practical central lock.
- Can be used in Zones 2, 21 and 22
- Weekly function test and annual emergency light duration test
HOFFMAN Straight Section, Feed-Through SS Hinged-Cover, Type 4X
Feed-Through Stainless Steel Hinged-Cover, Type 4X Straight Sections are used for enclosing wire and cable in wireway runs. Its water-proof and stainless steel features makes it suitable for frequently hosed down, very wet or highly corrosive applications. The traditional closed-loop design has an opening on one side for easy access to wires and cables. Sections are available in lengths from 12 inch to 120 inch.
STAHL LINEAR LUMINAIRE FOR FLUORESCENT LAMPS EXLUX SERIES 6001
The 6001 EXLUX luminaire is suited to normal lighting applications in almost any facility. In no time at all and with very little effort, using the accessories it can be fitted to the wall, ceiling or a pole, or alternatively, it can be suspended. The practical central lock has a safety switch that disconnects the power supply at all poles when the plastic enclosure is opened. Lightweight yet strong: The high-quality workmanship makes this luminaire robust and minimises maintenance requirements.
- Can be used in Zone 1, 2, 21 and 22
- Extremely robust: Impact strength rating of IK10
STAHL EMERGENCY LUMINAIRE WITH LED EXLUX SERIES 6409/4
The emergency luminaire with Series 6409/4 LED with integrated battery can be installed in stand-by switching, continuous mode or in switchable stand-by switching. A weekly functional test and annual rated operating time test are performed automatically. The results are indicated by an LED.
- State-of-the-art LED technology with high luminous efficacy and long service life
- Extremely high luminaire efficacy
- Choice between a 1.5 h or 3.0 h rated operating time
- Luminous flux after 100,000 h still 90% of the starting luminous flux
- Optionally with DALI for controlling and monitoring the luminaire
- Weekly function test and annual rated operating time test
HOFFMAN Hazardous Location LED Lights, Strip
Hazardous Location LED Strip Lights provide enclosure illumination in hazardous environments. These lights are ideal for remote and darkened enclosure applications in Class 1, Division 2 hazardous areas. With a robust design, these lights have a life span of 100,000 hours and superior lighting performance with easy field angle adjustment brackets. These versatile, light-weight LED lights provide mounting flexibility and are easy to install in an enclosure.
Reviews
There are no reviews yet.